Shift Selector

Using Neutral Hold Mode

When in neutral hold mode, a condition is maintained for about 25 minutes in which the power switch is switched to ACC, the shift position is in the N position, and the parking brake is released.

Neutral Hold Mode activation method 1

1. Start the engine.

2. Release the parking brake.

3. Shift the shift selectorto the N position.

4. Turn off the AUTOHOLD.

5. Press the electric parking brake (EPB) switch continuously until a sound is activated.

6. Press the push button start immediately after the sound is activated.

   Neutral hold mode operates.

   Make sure that N is displayed on the shift position indication in the instrument cluster.

Neutral Hold Mode activation method 2

1. Start the engine .

2. Release the parking brake.

3. Shift the shift selector to the N position.

4. Turn off the AUTOHOLD.

5. Press the power switch while pressing the electric parking brake (EPB) switch.

   Neutral hold mode operates.

   Make sure that N is displayed on the shift position indication in the instrument cluster.

Canceling Neutral Hold Mode

If any of the following operations is performed, neutral hold mode is canceled.

• Switch the power switch ON.

• Shift the shift selector to the P position.