Convenient Ways to Use the 360° View Monitor
Displaying the 360° view monitor automatically
Tap 
on the center display.
changes to 
and the 360° view monitor is automatically displayed under the following conditions.
-
The vehicle speed is about 20 km/h (12 mph) or slower.
-
The shift selector is shifted to the N or D position from the P position.
If the shift selector is in the D or N position, / is displayed.
The automatic display of the 360° view monitor may not be able to be switched in the following cases.
-
Directly after switching the vehicle power ON.
-
The vehicle speed is 20 km/h (12 mph) or faster.
The automatic display of the 360° view monitor is not linked to the Driver Personalization System.
Turning off the 360° view monitor auto non-display
If the vehicle speed is about 20 km/h (12 mph) or faster, the 360° view monitor can be displayed continuously.
Tap 
displayed on the navigation bar of the center display to set, or consult an Authorized Mazda Dealer.
Turning off the parking sensor 3D display
The parking sensor 3D display displayed in the front view, rear view, rear wide view, and see-through view can be turned off.
However, the parking sensor detection indication for the top view is displayed.
Tap displayed on the navigation bar of the center display to set, or consult an Authorized Mazda Dealer.
Changing the brightness and contrast of the 360° view monitor
When tapping 
on the center display while the 360° view monitor is displayed, the brightness and contrast of the 360° view monitor can be changed.
