How to Use the Fully Automatic Climate Control System
-
Start the engine.
-
Set the mode selector dial to the AUTO position.
-
Set the air intake selector to the outside air position (indicator light turned off).
-
Set the fan control dial to the AUTO position.
-
Press the A/C switch to operate the air conditioner (turn indicator light on).
-
Set the temperature control dial to the desired position.
-
To stop the operation, set the fan control dial to the 0 position.
Windshield Defrosting and Defogging
-
Start the engine.
-
Set the mode selector dial to the
position.
-
Turn the fan control dial to the desired speed.
In this position, the outside air position is automatically selected, and when the fan control dial is ON, the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windshield and side windows (Search). Airflow amount will be increased.
Set the temperature control to the hot or warm position when defogging ( position).
Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident.
Use the temperature control dial to increase the air flow temperature and defog the windshield more quickly.
