Convenient Ways to Use the Key
Auto re-lock function
Both doors and the fuel-filler lid are locked automatically if any of the following operations are not performed within about 60 seconds after they are unlocked by pressing the unlock button.
-
Open any door or trunk lid.
-
The vehicle power is switched to any position other than off.
The time until the door is automatically locked can be changed.
Set in the Mazda Connect “Settings” or consult an Authorized Mazda Dealer.
Power Saving Function
By turning on the power saving function of the key, the advanced keyless entry and the function to start the engine without removing the key from a pocket or purse/case are turned off, and the battery power consumption of the key can be reduced.
The remote control function is still operational by pressing a button on the key even while the power saving function is turned on. However, the remote operation indicator light does not turn on or flash.
Turning on the power saving function
-
Press the lock button on the key 4 times within 3 seconds.
The key operation indicator light turns on.
-
Press the lock button for 2 seconds or longer while the key operation indicator light is turned on.
The hazard warning lights and a warning sound operate 1 time, and the power saving function is turned on.
Turning off the power saving function
-
Press the lock button on the key 4 times within 3 seconds.
The key operation indicator light turns on.
-
Press the lock button for 2 seconds or longer while the key operation indicator light is turned on.
The hazard warning lights and a warning sound operate 1 time, and the power saving function is turned off.
