Charging Settings

How to set up the charging

Select Settings from the home screen on Mazda Connect.
Select EV Settings from the setting screen.
Select the setting item you want to change from the displayed content.

Charge When Connected

Cancels charging schedule to allow immediate charging.

Available setting changes
Enable, Disable

The charging timer can also be canceled on the screen displayed on the center display when the power switch is switched OFF.
When the charging is completed using the Charge When Connected setting, the charging timer schedule is restored.

Close Note

View Note

Charging Schedule

Selects desired vehicle charging days and times.

Function	Available setting changes
1 ----	Enable, Disable^*1	Edit, Delete^*2
2 ----
3 ----
4 ----
5 ----
6 ----
7 ----

If a list selected using the cursor has been set, the item can be Enable or Disable.
Settings can be Edit/Delete by sliding a list selected using the cursor to the right.

The charging timer does not work immediately after the lead-acid battery is removed or installed, or when no GPS signal has been received. When charging without receiving GPS, quick charging begins. When GPS signals are received, the charging timer becomes operational.
Immediately after switching to daylight savings, charging may occur at the charging timer time set before the switch to daylight savings until the power switch is switched ON.

Close Note

View Note

Edit

Function	Available setting changes
Start Time Select the desired charging start time.	Time (10-minute intervals)
End Time Select the desired charging end time.	Time (10-minute intervals)
Repeat Select the day⁠(s) of the week to repeat.	Monday ― Sunday
Charge Limit Select the desired charge limit method.	According to Battery Charge Level, According to Estimated Range
Battery Charge Level^*1 Select the desired maximum charge level.	100% ― 10% (10 levels)
Estimated Range^*2 Select the desired estimated range.	In 10 km increments

Function

Available setting changes

Start Time

Select the desired charging start time.

Time

(10-minute intervals)

End Time

Select the desired charging end time.

Time

(10-minute intervals)

Repeat

Select the day⁠(s) of the week to repeat.

Monday ― Sunday

Charge Limit

Select the desired charge limit method.

According to Battery Charge Level,

According to Estimated Range

Battery Charge Level^*1

Select the desired maximum charge level.

100% ― 10%

(10 levels)

Estimated Range^*2

Select the desired estimated range.

In 10 km increments

Can be changed when According to Battery Charge Level is selected for Charge Limit.

Use when you want to charge only the amount of charging you need. This helps you save power and prevent high voltage battery deterioration.
Can be changed when According to Estimated Range is selected for Charge Limit.

Use when you want to charge according to your planned driving distance.

The distance-to-full discharge changes depending on the driving conditions and surrounding environment. Check the actual remaining distance-to-full discharge.

If you change the distance unit after setting the Estimated Range, the Estimated Range will be calculated in the unit after the change. (If you change the units to miles after setting the estimated range to 100 km, the charge distance will be for 60 miles.)

A charging day is set using Repeat

If 1 repeat day is set, charging is repeated every week on the set day of the week.

Depending on the set days of the week, the Repeat indication is displayed as Weekdays, Weekends, and Daily. Otherwise, it is displayed as Custom.

Setting example

Function	Available setting changes
Start Time	21 : 00
End Time	6 : 00
Repeat	Friday
Charge Limit	According to Battery Charge Level
Battery Charge Level	80 %

In this case, charging is done every week from Friday at 21 : 00 hours to Saturday at 6:00 hours. However, if the Battery Charge Level reaches 80%, the charging is stopped even if it is before the End Time.

No day is set using Repeat

If no Repeat day is designated, charging is done only 1 time at the set hours.

Setting example (if settings below are made at 13 : 00 hours)

Function	Available setting changes
Start Time	12 : 00
End Time	18 : 00
Repeat	Once
Charge Limit	According to Estimated Range
Estimated Range	50 km

In this case, when the charge connector is connected, charging starts immediately for charging to 18 : 00 hours on the same day.

However, if a charging amount allowing a 50 km trip is reached, the charging is stopped even if it is before the end time.

Setting example (if settings below are made at 13 : 00 hours)

Function	Available setting changes
Start Time	1 : 00
End Time	8 : 00
Repeat	Once
Charge Limit	According to Battery Charge Level
Battery Charge Level	100 %

In this case, charging is done from the next day at 1 : 00 hours to 8 : 00 hours. However, if the Battery Charge Level reaches 100% is reached, the charging is stopped even if it is before the End Time.

Close Note

View Note

Charge Limit for AC Charging

Sets the charge limit when using an AC charger.

Available setting changes
100% ― 10% (10 levels)

For normal charge, set the maximum charge limit of the high voltage battery. Set the Battery Charge Level of the charging timer for each charging timer setting.

Close Note

View Note

Charge Limit for DC Fast Charging

Sets the charge limit when using a DC Fast charger.

Available setting changes
100% ― 10% (10 levels)

Charge Connector Lock

Configures when the charge connector is locked.

Available setting changes
Locked When Charging Unlocks connector when charging is complete or vehicle is unlocked.
Locked When Connected Unlocks connector only when vehicle is unlocked.
Off Charge connector remains unlocked at all times.

Available setting changes

Locked When Charging

Unlocks connector when charging is complete or vehicle is unlocked.

Locked When Connected

Unlocks connector only when vehicle is unlocked.

Off

Charge connector remains unlocked at all times.

High Voltage Battery Heater

Configures the high voltage battery heater operation.

Available setting changes
Automatic, Off