Parking Sensor System Operation
The switch can be activated when the ignition is switched ON, the selector lever is in any position except reverse (R), and the vehicle speed is about 10 km/h (6 mph) or less.
When the parking sensor switch is pressed, a beep sound is heard, the obstruction detection indication is displayed in the audio screen, and the indicator light in the switch illuminates.
-
If the system is cancelled, it will not restore automatically even when the vehicle speed is decreased to 10 km/h (6 mph) or less.
-
When the ignition is switched OFF, the system status before it was turned off is maintained. For example, if the ignition is switched OFF while the parking sensor is activated, the system will be activated when the ignition is switched ON the next time.
Sensor detection condition
The system can be used when the ignition is switched ON and the parking sensor switch has been turned on.
The sensors detect obstructions under the following conditions:
|
Sensor |
Condition |
|---|---|
|
Front Ultrasonic Sensor |
The selector lever is in any position except reverse (R), and the vehicle speed is about 10 km/h (6 mph) or less. |
|
Front Corner Ultrasonic Sensor |
The vehicle speed is about 10 km/h (6 mph) or less. |
|
Rear Ultrasonic Sensor |
The selector lever is in reverse (R). |
|
Rear Corner Ultrasonic Sensor |
The selector lever is in reverse (R), and the vehicle speed is about 10 km/h (6 mph) or less. |
The system is cancelled under the following conditions:
-
The parking sensor switch is pressed while the parking sensor is in operation.
-
The vehicle speed is 10 km/h (6 mph) or more. (Except rear sensor)
