Keys

• The headlights turn on/off by operating the transmitter. Refer to Leaving Home Light (Search).

• (With theft-deterrent system)

  The hazard warning lights flash when the theft-deterrent system is armed or turned off.

  Refer to Theft-Deterrent System (Search).

• (With the advanced keyless function)

  A beep sound can be heard for confirmation when the doors and the liftgate are locked/unlocked using the key. If you prefer, the beep sound can be turned off.

  The volume of the beep sound can also be changed.

  Refer to Personalization Features (Search).

  Use the following procedure to change the setting.

  1. Switch the ignition off and close all of the doors and the liftgate.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the LOCK button on the key for 5 seconds or longer.

     All of the doors and the liftgate lock and the beep sound activates at the currently set volume. The setting changes each time the LOCK button on the key is pressed and the beep sound activates at the set volume. (If the beep sound has been set to not activate, it will not activate.)

  4. The setting change is completed by doing any one of the following:

     • Switching the ignition to ACC or ON.

     • Closing the driver's door.

     • Opening the liftgate.

     • Not operating the key for 10 seconds.

     • Pressing any button except the LOCK button on the key.

     • Pressing a request switch.

• The doors and the liftgate can be locked by pressing the lock button while any other door or the liftgate is open. The hazard warning lights will not flash.

  When the lock button is pressed while any door is open and then the door is closed, all the doors and the liftgate are locked.

• Confirm that all doors and the liftgate are locked visually or audibly by use of the double click.

• Make sure all doors and the liftgate are locked after pressing the button.

• (With theft-deterrent system)

  When the doors are locked by pressing the lock button on the key while the theft-deterrent system is armed, the hazard warning lights will flash once to indicate that the system is armed.

• The system can be set to unlock all doors by performing a single operation.

  Refer to Personalization Features (Search).

  Use the following procedure to change the setting.

  1. Switch the ignition off and close all of the doors and the liftgate.

  2. Open the driver's door.

  3. Within 30 seconds of opening the driver's door, press and hold the UNLOCK button on the key for 5 seconds or longer (the sound of the doors locking/unlocking can be heard).

     After this, the system switches the setting each time the UNLOCK button is pressed (the sound of the doors locking/unlocking can be heard).

  4. The setting change is completed by doing any one of the following:

     • Switching the ignition to ACC or ON.

     • Closing the driver's door.

     • Opening the liftgate.

     • Not operating the key for 10 seconds.

     • Pressing any button except the UNLOCK button on the key.

     • Pressing a request switch.

• (Auto re-lock function)

  After unlocking with the key, all doors and the liftgate will automatically lock if any of the following operations are not performed within about 60 seconds. If your vehicle has a theft-deterrent system, the hazard warning lights will flash for confirmation.

  The time required for the doors to lock automatically can be changed.

  Refer to Personalization Features (Search).

  • A door or the liftgate is opened.

  • The ignition is switched to any position other than off.

• (With theft-deterrent system)

  When the doors are unlocked by pressing the unlock button on the key while the theft-deterrent system is turned off, the hazard warning lights will flash twice to indicate that the system is turned off.

The panic button will work whether any door or the liftgate is open or closed.