Instrument Cluster and Display

The warning light stays on for a few seconds when the ignition is switched ON.

This warning light indicates low engine oil pressure.

 

---

Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage.

Close Caution

View Caution

If the light illuminates while driving:

1. Drive to the side of the road and park off the right-of-way on level ground.

2. Turn off the engine and wait 5 minutes for the oil to drain back into the oil pan.

3. Inspect the engine oil level (Search). If it's low, add the appropriate amount of engine oil while being careful not to overfill.

    

   ---

   Do not run the engine if the oil level is low. Otherwise, it could result in extensive engine damage.

   Close Caution

   View Caution

4. Start the engine and check the warning light.

If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer.